Lighthouse Tea Light Holder, 'No Fishing' Design

Lighthouse Tea Light Holder, 'No Fishing!' Design

All the sea creatures are fighting for their Friday fish supper! Battling it out over this lighthouse, the seagulls, crabs and octopus are all trying of rather fair share, even involving a poor starfish by mistake!

This tea light creates a warm glow at the top of the lighthouse

►Hand sculpted from ceramic stoneware clay, fired to above 1200 degrees and finished with oxides, glazes and acrylics.
►Dimensions approx - 14 inches (36cm) tall, 5 inches (13cm) width

 ----------------------------------------------------------------------------------------------------------------

MY PROCESS

I hand sculpt all of my pieces from ceramic stoneware clay. Either via coiling or slab building techniques. 
Each piece is then dried until leather hard and the clay can be worked on and details added. Further controlled drying takes place to ensure a piece doesn't crack and all the moisture has evaporated.
A first 6 hour kiln firing takes place up to 1000 degrees C then cooled down so decoration such as oxides, underglazes and glazes can be added. A second firing over 8 hours is then done up to 1220 degrees C and finally once cooled I finish many of my pieces by hand painting a cold finish such as acrylics and lustre.

Each piece is carefully constructed and decorated making each one completely unique to you.

Thanks for stopping by my shop

Original design by Lucy Kite ©Blue Fish Studios 2022